Resultados que coinciden con los términos de búsqueda ""

T/C J extension, Female-plug, 25ft F/G +S/S Armour, fork-terminal [A900J-300-H-3-1]
https://www.mpipressure.com/tc-j-extension-female-plug-25ft-fg-ss-armour-fork-terminal-p-455008.html

T/C J extension, Female-plug, 25ft F/G +S/S Braid, fork-terminal [A900J-300-B-3-1]
https://www.mpipressure.com/tc-j-extension-female-plug-25ft-fg-ss-braid-fork-terminal-p-455005.html

T/C J extension, Female-plug, 25ft PVC, fork-terminal [A900J-300-P-3-1]
https://www.mpipressure.com/tc-j-extension-female-plug-25ft-pvc-fork-terminal-p-455002.html

T/C J extension, Female-plug, 50ft F/G +S/S Armour, fork-terminal [A900J-600-H-3-1]
https://www.mpipressure.com/tc-j-extension-female-plug-50ft-fg-ss-armour-fork-terminal-p-455009.html

T/C J extension, Female-plug, 50ft F/G +S/S Braid, fork-terminal [A900J-600-B-3-1]
https://www.mpipressure.com/tc-j-extension-female-plug-50ft-fg-ss-braid-fork-terminal-p-455006.html

T/C J extension, Female-plug, 50ft PVC, fork-terminal [A900J-600-P-3-1]
https://www.mpipressure.com/tc-j-extension-female-plug-50ft-pvc-fork-terminal-p-455003.html

T/C, RTD, 4-20mA and 0-10VDC Temp & Process Indicators
T/C, RTD, 4-20mA and 0-10VDC Temp & Process Indicators c/w alarm relays …
https://www.mpipressure.com/tc-rtd-4-20ma-and-0-10vdc-temp-process-indicators-p-420000.html

Transducer / Transmitter Cables
MPI manufactures Melt Pressure Transducer / Transmitter Extension Cables with mating connectors Connector options: 6pin Bayonet (PC06A-10-6S equiv.), 8pin Threaded (PC06A-12-8S equiv.) or Gentran 6pin ( Cannon WK6-21C-5/16 equiv.) Cable options (all with shield and ground) : PVC, Teflon with or without S/S Braid or Armour. MPI Melt Pressure Cables (download Brochure) …
https://www.mpipressure.com/transducer-transmitter-cables-p-450000.html

Transducer Simulator - mV/V - 6pin + 8pin [MPI-SIM-mV/V]
https://www.mpipressure.com/transducer-simulator-mvv-6pin-8pin-p-510005.html

Transducer Tip Spacer / Shim
Transducer Tip Spacers or Shims - used on old barrels to help push transducers/rupture disks away from the inner barrel wall. Note: The melt pressure transducer / transmitter should never stick into the material flow - it should be recessed. This is one of the main reasons for early melt pressure sensor failure. …
https://www.mpipressure.com/transducer-tip-spacer-shim-p-500000.html