Transducer Tip Spacer / Shim

  • Transducer Tip Spacer / Shim

Transducer Tip Spacers or Shims - used on old barrels to help push transducers/rupture disks away from the inner barrel wall.

Note: The melt pressure transducer / transmitter should never stick into the material flow - it should be recessed. This is one of the main reasons for early melt pressure sensor failure.
Features:
  • Used to seal push Transducer Tip Back from inner barrel wall
  • copper
  • Precision Machined
  • Sizes 0.025" to 0.90"

Melt Pressure Transducers, Transmitters, Instruments and Gauges
Melt Pressure
Transducers, Transmitters,
Instruments and Gauges

Contact Us

Ask A Question