Resultados que coinciden con los términos de búsqueda ""

Pressure Test EquipmentPressure Test Equipment
Used to test Pressure Transducers. Transmitters and Indicators …
https://www.mpipressure.com/pressure-test-equipment-p-510000.html
Transducer / Transmitter CablesTransducer / Transmitter Cables
MPI manufactures Melt Pressure Transducer / Transmitter Extension Cables with mating connectors Connector options: 6pin Bayonet (PC06A-10-6S equiv.), 8pin Threaded (PC06A-12-8S equiv.) or Gentran 6pin ( Cannon WK6-21C-5/16 equiv.) Cable options (all with shield and ground) : PVC, Teflon with or without S/S Braid or Armour. MPI Melt Pressure Cables (download Brochure)
https://www.mpipressure.com/transducer-transmitter-cables-p-450000.html
Transducer Tip Spacer / ShimTransducer Tip Spacer / Shim
Transducer Tip Spacers or Shims - used on old barrels to help push transducers/rupture disks away from the inner barrel wall. Note: The melt pressure transducer / transmitter should never stick into the material flow - it should be recessed. This is one of the main reasons for early melt pressure sensor failure. …
https://www.mpipressure.com/transducer-tip-spacer-shim-p-500000.html
Transmitter Simulator - 4-20mA/0-10VDC [MPI-LB01G]Transmitter Simulator - 4-20mA/0-10VDC [MPI-LB01G]
The MPI-LB01G is used to simulate the output of a standard MPI (or competitor) melt pressure transmitter with either a 4-20mA or a 0-10VDC output. The pressure transmitter can be disconnected and the MPI-LB01G can be connected in its place to troubleshoot whether there is a transmitter, cable, or indicator problem. …
https://www.mpipressure.com/transmitter-simulator-4-20ma0-10vdc-p-670020.html

Transductores, Transmisores,
Instrumentos y Manómetros
de Presión de Fusión

Contáctenos

Envíanos tus Preguntas