Melt Pressure Transducers, Transmitters, Instruments and Gauges
Toronto Buffalo
  Toronto       Buffalo

Industrial Pressure Transducers

MPI Melt Pressure makes a complete line of Industrial Pressure Transducers in either Hydraulic or Flush Mount versions for injection molded and blow molded operations.

The Hydraulic Pressure Transducer is specially designed for high cyclic molding applications and comes as a standard 3mV/V configuration with an industry standard 1/4"-18 NPT Male thread and a standard Bayonet Connector. With a 0.5% combined error rating and 80% output calibration you will get accurate readings. It has a temperature rating of 250 degrees F (120 C) and ranges from 0-15 to 0-30,000psi. This unit is made from Wetted Stainless Steel Parts.

The Flush Mount Pressure Transducer features Flush Mount 3/4"-16 UNF-3A Pressure Port and a standard 3m V/V 6-Pin Bayonet Connector. It has a 0.5% combined error and 80% output calibration. It has a temperature rating of 250 degrees F (120 C) and ranges from 0-15 to 0-30,000psi. All parts are Wetted Stainless Steel.

Both these units will meet or exceed your injection and blow molded requirements while saving you time and money.
 

   

MH - Hydraulic Pressure Transducers

MHP - Hydraulic Pressure Transducer



MHP - Pressure Transducers

 


FEATURES

  • Specially designed for high cyclic injection molding applications
  • Standard 3mV/V
  • Standard 1/4”-18 NPT Male
  • 6pin Bayonet Connector
  • 0.5% combined error
  • 80% Output Calibration
  • 250oF (120oC) Rating
  • Ranges from 0-15 to 0-30,000psi
  • WETTED PARTS - ALL STAINLESS STEEL

 

MHP - Hydraulic Pressure Transducers

OPTIONS - MHP

  • CONNECTOR: 4 Pole DIN
  • OUTPUT: 2.5, 3.3mV/V
  • PRESSURE PORT: 1/8”-27NPT Male/Female

MHP - Hydraulic Pressure Transducers Brochure (pdf)
 

Part# Pressure-psi $US

1/4"NPT-male, 4pin
MHP-3P1.5M4S
MHP-3P3M4S
MHP-3P5M4S
MHP-3P10M4S
1/8"NPT-female, 4pin
MHP-3P1.5M48F
MHP-3P3M48F
MHP-3P5M48F
MHP-3P10M48F


1,500
3,000
5,000
10,000

1,500
3,000
5,000
10,000


$490
$490
$490
$490

$510
$510
$510
$510

 

 

MHP320 - Flush Mount Pressure Transducers

MHP320 - Flush Mount Pressure Transducer



MHP - Pressure Transducers

 


FEATURES

  • Flush Mount 3/4”-16 UNF-3A Pressure Port
  • Standard 3mV/V
  • 6pin Bayonet Connector
  • 0.5% combined error
  • 80% Output Calibration
  • 250oF (120oC) Rating
  • Ranges from 0-15 to 0-30,000psi
  • WETTED PARTS - ALL STAINLESS STEEL

 

MHP320 - Flush Mount Pressure Transducers

OPTIONS - MHP320

  • CONNECTOR: 4 Pole DIN
  • OUTPUT: 2.5mV/V

MHP320 - Flush Mount Pressure Transducers Brochure (pdf)
 

 

Part# Pressure-psi $US

3/4"-16UNF-3A, 6pin
MHP320-3-P1.0MS
MHP320-3-P1.5MS


1,000
1,500


$550
$550